Shingles are flat, overlapping items that protect the roof from water damage and other damaging elements. Shingles are typically constructed of wood, slate, asphalt or composite materials. Staples or roofing nails are typically used to keep shingles in place. It usually takes from one to several days for a roofing crew to complete new roof installation on a new house. Very large houses or roofs that require specialty products may take longer. Inclement weather can inhibit roof construction. Roofing companies will avoid working on days when rain is probable and will cover the roof with a waterproof tarp to prevent any leakage.
A Leaking Roof
Roof leaks are a common, yet a very distressing cause of damage to the home. A roof without proper maintenance and care is at risk of damage from a variety of sources. Homeowners should stay proactive when it comes to roof maintenance. While regular maintenance can help spot and prevent damaged and weathered sections from leaking, many homeowners don’t realize there is a problem until it is too late and serious damage has been done to their home. It a good idea to take advantage of the annual roof inspection offered by a few companies in the Houston Area. The simplest cause of roof leaks is age. Temperature changes that come with seasonal weather, ultra violet rays from the sun, wind and storms all wear on your the roof shingles and dissolve the tar that holds everything together. Inclement weather can wreak havoc on rooftops. High winds can pull off shingles, and excessive rain or snow will worm its way into any cracks in the roof and penetrate the house beneath. Any holes in the roof, whether from the removal of a rooftop installation or from vents that are not properly sealed, allow water to infiltrate the home.
Your Roof Can Be Compromised By Extra Weight
Extra weight from debris, such as large branches or a buildup of snow and ice, weighs down the roof. The extra pressure compromises the overall integrity of the structure Debris can also collect water, preventing it from reaching the gutters and the ground. The excess trapped moisture seeps through the roof and causes rot and mold growth. Overflowing gutters back up water onto the roof and, like debris on the roof, keep the water trapped in one place where it can do significant damage.
Regular Inspection and Maintenance
With the various ways a roof can be damaged, it’s important for homeowners to do their part to keep their roof safe. Keeping the roof clean is important, and professional roof cleaning services are available to handle especially dangerous or dirty roofs. A clean roof is easier to examine for any weaknesses and can prevent rot from setting in. An examination of the roof, either from a ladder or from the ground with a pair of binoculars, should be performed after every major storm to locate possible damages caused by rain and high winds. Trimming overhanging tree branches near the roof keeps branches and leaves from falling on to the roof and either directly damaging the structure or clogging the gutters. Clogged gutters are a huge nuisance, and regular cleaning of gutters will help keep the roof and the rest of the house safe from water damage. With a bit of vigilance and care, any roof can protect a home for many years.
Mold Remediation Austin
The First Step Is A Thorough and Complete Inspection.
The first consultation and initial evaluation should be free. After an initial evaluation a more comprehensive moisture inspection should be performed. In Texas, if this is necessary a licensed Mold Inspection Firm will be required.
The Second Step is accurate and verified testing.
Your Austin mold inspection report should include a complete photographic study with hundreds of photos, a detailed written study and specific recommendations. The report will include an accurate quote for your guaranteed mold and moisture solution. After any repair work to fix the moisture problem, your home should be scientifically tested again. It should test the moisture, temperature and humidity throughout your house and collect air samples from multiple places inside and outside to accurately measure the spore count throughout your environment. These spore samples are then sent to the, a independent laboratory for identification, verification and precise counting.
The Third Step is a thorough cleaning of your home.
The inside of your entire home is wiped down or scrubbed with our TM100 mold-eating enzyme solution. Then, we use a HEPA (high efficiency particulate air) vacuum your home to capture loose debris and organic material prior to the enzyme fogging process.
The Fourth Step is dinnertime: An Enzyme Fog.
Now it is time to reach places that no one could go. Our TM100 enzyme fog will reach inside every nook and cranny of your home: deep into fabric, inside your heating and air conditioning systems, into crawl spaces and attic insulation. The enzymes zero in and literally consume the mold and spores. We follow that with a second HEPA vacuum process to capture whatever remaining material possible.
The Fifth Step is follow-up testing and a Guarantee.
After the enzymes have done their work, contractors should go back in and test again for moisture, temperature, humidity and any remaining spores. Take a look at the before and after Lab test results that the process produced to the right outcome. It is these types of results that guarantee the work and solutions were successful. This will complete the Austin mold remediation process.
How To Clean Up After Fire Damage
You Cannot Enter Until The Fire Marshall Gives Approval
After a fire disaster, homeowners commonly want to know right away to what extent the fire has damaged their property. They want to see if there is anything left of their valuable possessions that are still salvageable. Understandably, fire victims want to immediately get into rebuilding and restoring their home and their lives. It may be tempting for property owners to go into the burn site area the instant it appears that the flames have died down. However, under no circumstances should anyone re-enter a fire damaged property without the approval of the fire marshal first. Even if the fire seems to have been fully extinguished, flames can easily reignite with just a small gust of wind. The foundation holding up the property structure could be weak and crumbling after having been damaged by the fire. Smoke and fumes could still be emanating from the charred pieces, and these could be highly toxic and poisonous. Remember a burn site must first be declared safe by the fire department officials before trying to do any fire damage cleaning, restoring, and rebuilding.
Contact Insurance Company
Cleaning up after fire damage is a long and tedious process. It can be potentially quite costly too. However, the damage caused by the fire can actually be worsened if the people handling the fire restoration Austin process don’t really know what they’re doing. Property owners need to know, besides the actual fire damage there will be water damage caused by work of putting out the fire. It is recommended that homeowners who have been fire victims contact their insurance company immediately after the fire. Aside from the assistance in assessing the damage to the property, the insurance company can also help in evaluating which pieces are salvageable or not. Additionally, they can also help in finding suitable fire restoration professionals for the insurance holder. Fire restorers are armed with the right knowledge and the proper equipment needed in cleaning up after fire damage. They can not only minimize further damage to a homeowner’s burned property, but they can also salvage many precious belongings and restore them to their original condition. The outright cost of hiring fire and water damage restoration professionals may seem steep at first, but they could save homeowners a lot of money (not to mention save a lot of their original property) in the long run. They can determine which items can be saved and restored, instead of having the homeowner buy everything brand new. Fire damage is not uniformly similar for all fire victims. It is therefore important to check the extent of the fire and water damage first before doing any cleaning. Doing so can help homeowners form a battle plan on how to proceed with the cleaning process. It will also help them estimate how much the cleanup is going to cost them.Find out how much of the property has been damaged by fire. Also find out how much of the property has been damaged by the water used to extinguish the fire. Check which furniture pieces have been damaged and what their damages are. Determine how much time had passed since the fire occurred.
Don’t Delay The Clean Up
Ideally, fast and immediate action should be undertaken when cleaning after fire damage. Many items might not be salvageable anymore especially if left in their current scorched state for some time. But if getting professional fire restorers is out of budget and still needs to be planned, there are some things that homeowners can do themselves to save some of their personal belongings. The first thing that homeowners can do themselves is to ventilate the fire damaged property. Open windows, use electric fans, switch on dehumidifiers – anything to get the air circulating within the area. Smoke particles and other toxic fumes trapped within the area need to be dispersed as soon as possible. Secondly, anything that had gotten wet such as clothes, draperies, wall-to-wall carpets, and rugs should be dried immediately. Hang them on clotheslines, lay them out under the sun, and use fans to help them dry quicker. If these things are left wet, mold and mildew could form on them and make cleaning a lot harder and more expensive.